Your Source for Parts and Equipment in the Can Making and Metal Packaging Industry
© Copyright 2016 by ECT Technology ulum | Sed vulputate
Come see IMETA at the PackExpo in Las Vegas!
September 25 - 27
SavePro Powder Monitor
The savePro® unit is an inline-powder monitor that continuously measures the necessary minimum amount of powder on the welded
seam of each single can.
The weld seam has to be covered with a 100% pore-free coating and the uniform film thickness should be within a very narrow tolerance window to save powder costs.
The savePro® powder monitor prevents rejects. It measures the high-density coating of the powder stripe before the powder particles are fused in the curing oven.
The system orders the welder to stop if too little or no powder is applied.
|Quality by Vision|
|Klinghammer - Bertil Ohlson|
|Calibration Crowns + Toolings|
|Spare Parts List|
|ABM Spare Parts List|
|FBB Spare Parts List|
|SBW Spare Parts List|
|VAA-K Spare Parts List|
|360° Powder Coating|
|Wet lacquer roller coating DRC|
|NFS airless seam coating unit|
|Roller coating system, ORC series|
|CPC Powder Coating|
|SPC Powder Coating|
|PDE Automatic powder drum evacuator|
|savePro Powder Monitor|
|Curing system. ACM series|
|Curing system. PCB series|
|Curing system. PCA series|
|TP Can exit conveyors|
|LTP Can take-off conveyor|
|Two-stage toothed belt conveyor, ACT series|
|Toothed belt conversion kit|