Your Source for Parts and Equipment in the Can Making and Metal Packaging Industry

© Copyright 2016 by ECT Technology ulum | Sed vulputate

Phone: (845)621-3700

Come see IMETA at the PackExpo in Las Vegas!

Booth: 6249

September 25 - 27

The SEAM360 is the ultimate machine vision double seam can inspection gauge. The system is used for both three piece and two piece beverage and food cans.


Conventional seam scan technology sample seams at 2-3 points around the can. However, what about the points in between the sample points?


If you measure at a few points around the seam, using a micrometer or seam thickness gauge and destructive tests with a seam scope - you're missing the most critical information!


Problems can arise as close as a few millimeters from your measurement point and you will not detect them. This means that if a problem is missed, it can be a few more shifts before the problem is detected - resulting in many bad cans being closed or even shipped!


Instead of trying to measure every can (100%) but at a few measurement points, the SEAM360 measures every can's total external surface area. This exposes many issues that were so far invisible to the operator!


X-ray systems measure at only a few points around the can, and pressure systems on the seamer can miss even obvious issues because of their technology (e.g., false seams!).


Using non-destructive optical technology, Quality By Vision's new SEAM360 is capable of detecting all of these issues in a fraction of the time it takes to do a seam test and with no operator influence on the results! SEAM360 is the first system capable of checking every point on the seam, so there's no chance of missing anything.


Think of SEAM360 as the ultimate double seam gauge check.


The intuitive software clearly points out what the problem is and where it occurred.


Many tooling and seamer related issues can be fixed quickly, using the Clearance Gauge.

Advantages to conventional seam testing methods:



Resolution (HD)


0.0002" (two ten-thousandths) or better for seam thickness and length


Interface


USB2


Optical units


Laboratory (manual)

In-line (automatic)


Scan time (one can)


About 8 seconds


Measurement cycle time (6 cans)


About 2 minutes


So far, the system has detected:



And best of all… its non-destructive!

SEAM360

SEAM360 - Brochure